Whether it’s a large hospital, care home or community healthcare centre, you can provide inspirational rooms that don’t just perform and look good but also take hygiene and the safety of your people, patients and residents seriously.
When it comes to social housing and home adaptations, the way a home looks is just as important as how it functions.
Whether it’s a commercial kitchen or a work’s cafeteria, a five-star hotel or a chain of restaurants and cafes, safety, hygiene, the ease and speed of installation and cost are all top of mind when working with our customers.
We partner with designers, companies and industry experts to provide floors, walls and doors solutions across a number of specialist sectors, each with particular challenges.
As the inventors of safety flooring, we pride ourselves on being able to create safe environments for a variety of areas, and transport is no different. We’ve been keeping bus and rail passengers safe for decades on both public and private transport.
Altro Custom floors and walls allow you to design for areas where looks not only count, but can positively affect the views and even the wellbeing of the people who live, work or visit. Imagine classrooms with floors that look like grass or sand; Mexican restaurants with beautiful views of the Mayan Riviera on the walls, or a cutting-edge fashion shop with modern art running from floor to ceiling.
New IdeasBoard is your creative space to collect and share your inspiration and ideas.
In your IdeasBoard you can organise your content, create and share new collections and share.
Showcasing our services and solutions in a variety of real-world applications, our commercial flooring, walling and doorsets case studies display how Altro’s products can be used to address industry-specific issues across a range of sectors.
Altro resilient flooring should be laid in accordance with the Code of Practice BS 8203:2001+A1:2009. The material should be stored for approximately 24 hours at a room temperature of not below 18°C. When laying, the area should be at a steady temperature of between 18°C and 27°C for at least 48 hours prior to, during and for at least 24 hours after completion.
Ensure that the material used in any one area is from the same manufacturing batch.
The material should be checked for any possible faults prior to laying and should be conditioned before adhering to the subfloor for a minimum of 4 hours. Sheet material should be cut into lengths and laid loose for conditioning. If the sheets are going to be cut in before adhering them to the subfloor, they should be back rolled to eliminate any possible shrinkage before commencing the fitting.
Pattern ranges of Altro resilient flooring will require the pattern to be matched from sheet to sheet (for further information contact Altro).
Claims against warranty for colour, batch or obvious material defects will only be considered if the flooring has not yet been permanently bonded.
The subfloor must conform with the requirements of BS 8203:2001+A1:2009.
For the correct choice of AltroFix™ adhesive, refer to the Altro adhesives data sheets. Excess adhesive should be removed with a cloth with a neutral detergent in the case of acrylic adhesive or with alcohol for two component adhesives. Removal of excess adhesive should be done as work progresses and whilst the adhesive is still wet.
Altro resilient flooring can be straight laid or used in conjunction with “sit on” or “set in” skirtings. The materials can also be self-coved. The sheet flooring should be reverse-laid (not the wood patterned sheet), i.e. the lengths are laid against each other in opposing directions. Consult the label for the relevant instructions. Refer to the Altro detail diagram sheet of the appropriate finishes or the Altro safety flooring installations guidance sheet for self-coving.
Once the material has been conditioned, the joints can either be cut in before or after applying the adhesive. This will depend upon the preference of the flooring installer, however, it should be borne in mind that in large installations if the joints and / or the perimeter has been cut in, any movement of the sheet whilst placing it into the adhesive will create a problem.
Turn the material back and apply the adhesive to the subfloor in accordance with the manufacturer’s instructions.
After the specified open time, which can depend upon the subfloor, place the floorcovering back into the adhesive pushing out any air bubbles. Remove any excess adhesive immediately and depending upon the adhesive used (refer to Altro‘s adhesives data sheets) roll the whole area with a floor roller both width ways and length ways. All joints within the sheet should be overlapped before cutting in, grooving and hot welding.
It is recommended that all Altro resilient flooring are hot welded.
The welding should be carried out at least 24 hours after laying to give the adhesive time to harden so that the heat from the welding gun will not draw up the adhesive onto the grooved joints. All joints must be grooved and hot welded using the matching colour Altro Weldrod™ in the approved manner.
The grooves should be approximately 1/3 in depth of the flooring. The welding rod should be trimmed using a spatula equipped with guide blade or a Mozart trimming knife. This will remove approximately 3/4 of the welding rod above the surface of the floor. After the welding rod has completely cooled, remove the guide blade from the spatula and trim the remaining exposed welding rod flush with the surface of the flooring.
Altro resilient flooring should be covered and protected from all other trades with a suitable non-staining protective covering.
For maintenance of Altro resilient flooring refer to the Altro resilient flooring recommended cleaning methods.
NOTE: “Altro APAC Pty Ltd” (“Altro”) endeavours to ensure that advice and information given in Product Data Sheets, Method Statements and Material Safety Data Sheets (all known as Product Literature) is accurate and correct. However, where Altro has no control over the selection of its products for particular applications, it is important that any prospective customer, user or specifier, satisfies him / herself that the product is suitable for the intended application. In this process, due regard should be taken of the nature and composition of the background / base and the ambient conditions both at the time of laying / applying / installing / curing of the material and when the completed work is to be brought into use.
However, as site conditions and the execution of the work are beyond our control, we accept no resultant liability.
Altro’s policy is one of continuous research and development and we reserve the right to update our products and information at any time without prior notice.
