Altro Custom floors and walls allow you to design for areas where looks not only count, but can positively affect the views and even the wellbeing of the people who live, work or visit. Imagine classrooms with floors that look like grass or sand; Mexican restaurants with beautiful views of the Mayan Riviera on the walls, or a cutting-edge fashion shop with modern art running from floor to ceiling.
New IdeasBoard is your creative space to collect and share your inspiration and ideas.
In your IdeasBoard you can organise your content, create and share new collections and share.
Showcasing our services and solutions in a variety of real-world applications, our commercial flooring, walling and doorsets case studies display how Altro’s products can be used to address industry-specific issues across a range of sectors.
Altro Whiterock Imagination Wall combines a printed line drawing with a versatile dry wipe finish. Altro Whiterock Imagination Wall extruded sheets are hard coated for added scratch resistance.
Extruded semi-rigid PVCu sheet.
Colour:
Surface finish:
Thickness:
Size:
Weight:
Maximum service temp:
White with printed design
Gloss
2.5mm
941 mm (height) x 1220 mm (width)
3.6 kg/m²
60°C
Altro Whiterock PVCu extruded sheet is supplied with a protective film on its face which can be left in place until the room is ready for use.
This also helps to protect the surface from dust while other trades are in the area.
The sheets can be fixed directly to most dry substrates depending on its surface suitability, using one of the following methods:
Cutting to be carried out using a fine tooth circular saw with TCT cutting blades and pressure guide, fine tooth blade jigsaw, a fine tooth handsaw, a high speed TCT router.
Please see relevant detailing drawings and fitting guides.
The corners of Altro Whiterock Imagination Wall cannot be thermoformed, in these circumstances the internal corners can be scribed and butted into the corner and sealed with silicone sealant. The external corners can be fitted using an unprinted 20 mm x 20 mm or 30 mm x 30 mm PVC angle (A839) or a brushed stainless steel angle.
Wipe clean with a soft cloth after every use, taking care to remove all pen residue that can accumulate along trim edge. Regular cleaning using a soft cloth and a suitably diluted mild detergent is all that is normally required.
In case of permanent marker being used on the product, do not use ketone solvents e.g. acetone to remove the mark.
Top tip: Draw over the mark with a dry-wipe marker, allow to dry and then wipe clean. Care should be taken not to wipe over any joints as this will lead to staining along the edges.
Resistant to a wide range of chemicals, specific details on request.
Sheets should be stored flat, fully supported and left for 24 hours to attain the ambient room temperature prior to installation (min 14°C).
Altro Whiterock Imagination Wall has a maximum working temperature of 60°C. When Altro Whiterock Whiteboard is installed as a single sheet with the hook and loop installation method or with the MS Polymer adhesive installation method, it is considered to be a fixture and fitting and not subject to Approved Document B (fire safety) of the building regulations.
Our Technical Services Department is available for advice on 01462 707600.
| Property | Standard | Value |
|---|---|---|
| Surface finish | Gloss | |
| Thickness | 2.5mm | |
| Size | 941 mm x 1220 mm | |
| Weight | 3600 g/m² | |
| Density | ISO 1183 | 1.44 g/cm3 |
| Maximum service temperature | 60℃ | |
| Hardness (Shore D) | ISO 868 | 76 |
| Fire resistance | EN 13501-1 | B- s3, d0 (Fully bonded with AltroFix adhesive only) |
| Notched Impact resistance | ISO 179/1ea | 9.5 KJ/m² |
| Impact resistance | ISO 179/1eU | +20℃ without breakage 0℃ without breakage -20℃ without breakage |
| Flexural strength | ISO 178 | 70 MPa |
| Tensile strength | ISO 527 | 52 MPa |
| E-modulus of elasticity | ISO 527 | 2950 MPa |
| Compressive strength | DIN 53421 | 68 N/mm² |
| Vicat softening point VST/B | ISO 306 | 73℃ |
| Expansion coefficient | DIN 53752 | 0.07 mm/mK |
| Heat distortion temperature | ISO 75-2 | 60℃ |
| Water Absorption | ISO 62 | ≤ 0.1% |
| Thermal Conductivity | EN 12524 | 0.17 W/mK |
| ″U″ value (bonded to 100mm block wall) | DIN 52612 | 1.8 W/m² ℃ |
| Moisture Vapour Transmission rate (MVTR) | ASTM E96 | ≤ 0.12g/m²/24hrs |
| Water vapour resistivity | ASTM E96 | 3.82 x 105GN.S/Kg.m |
Altro Limited, Works Road, Letchworth Garden City, Hertfordshire SG6 1NW. Altro, Altro Whiterock and AltroFix are trademarks of Altro Limited.
