Altro Tect vertical
For walls we have a vertical variant.
Registering with MyAltro allows you to save all your favourite technical documents, blogs and videos in one place. Get access to exclusive content, additional technical support and more. Once you have submitted the registration form you will receive an email to verify your account. You will need to verify your account in order to log in, so follow the link in the verification email to complete this action.
When you set your password, it will need to be at least 8 characters including an upper case letter, a lower case letter, a number and a special character.
Enter your details below to login
Can't see the region you're looking for? You can find a list of our global locations here
You are currently on the site for Ireland. We think you might be looking for the site for United States/Canada.
In general, flooring will follow the profile of the underlying substrate. The surface profile may be reflected in thinner resin flooring types. This will affect the appearance and wear. (FeRFA types 1, 2, 3, 4 and 5)
In common with other single colour high gloss finishes, Altro Tect may exhibit scratching with traffic and abrasion, this is particularly prominent in darker colours.
The samples we send are to demonstrate colour and finish only. and may not be the thickness noted above. If you require a specific sample, please contact us.
Altro Tect standard, slip-resistant and vertical variants are also available in clear.
Safety Red, Safety Yellow and Black are intended for line marking and small areas of demarcation only. Dark colours, in particular Black, will highlight any defects such as roller lines and scratches.
For safety colours, light or vibrant coloured coatings, a white undercoat should be used and additional coats may be required.
Safety Red, Safety Yellow and White are not included in Altro resins standard colour range. Bespoke non-standard colours will be subject to additional lead time and possibly increased cost.
| FeRFA type | 3 |
| Nominal thickness | 350 - 500μ |
| Warranty | 2 years |
| Life expectancy: | 7 years |
| Impact resistance | Limited |
| Wear characteristics | Medium duty |
| Slip resistance | - |
| Service temperature | 0°C - 60°C |
| Chemical resistance | Moderate |
Can be used vertically in medium duty areas where there is a requirement to meet the need for good chemical resistance.
Altro offer up to 30 years guarantee on our flooring, wall cladding and transport flooring products. See the full terms and conditions for more detail.
Read moreRevit components for Altro flooring and Altro Whiterock wall cladding are available FREE OF CHARGE from BIMStore
Read moreSee the possibilities for yourself
Inspire me
