As from 24 August 2023 adequate training is required before industrial or professional use.
Altro Seal is resistant to a wide range of chemicals and UV light and can also be used as a final seal coat to give extra chemical resistance to epoxy resin systems. It has approximately 90 microns per coat and is available in coloured and clear.
We offer a standard variant for where there is a low risk of slipping.
|Nominal thickness||90 - 180μ|
|Life expectancy:||5 years|
|Wear characteristics||Light duty|
|Service temperature||0°C - 60°C|
Choose a different variant from this resin product range.
In general, flooring will follow the profile of the underlying substrate. The surface profile may be reflected in thinner resin flooring types. This will affect the appearance and wear. (FeRFA types 1, 2, 3, 4 and 5)
The samples we send are to demonstrate colour and finish only. and may not be the thickness noted above. If you require a specific sample, please contact us.
Altro Seal is also available in clear.
Safety Red, Safety Yellow and Black are intended for line marking and small areas of demarcation only. Dark colours, in particular Black, will highlight any defects such as roller lines and scratches.
For safety colours, light or vibrant coloured coatings, a white undercoat should be used and additional coats may be required.
Safety Red, Safety Yellow and White are not included in Altro resins standard colour range. Bespoke non-standard colours will be subject to additional lead time and possibly increased cost.
For light duty areas where there is a low risk of slipping.
Typical applications include: