Altro Coat is a fast-track solution for light to medium duty areas and is great for use on newly installed cementitious substrates. Available in a wide range of colours, it is a two-coat system with approximately 90 microns per coat.
We offer a silk finish standard variant.
FeRFA type | 2 |
Nominal thickness | 180μ |
Guarantee | 2 years |
Life expectancy: | 5 years |
Impact resistance | Limited |
Wear characteristics | Light duty |
Slip resistance | - |
Service temperature | 0°C - 60°C |
Chemical resistance | Moderate |
Choose a different variant from this resin product range.
{{CurrentDetails?CurrentDetails.description:""}}
In general, flooring will follow the profile of the underlying substrate. The surface profile may be reflected in thinner resin flooring types. This will affect the appearance and wear. (FeRFA types 1, 2, 3, 4 and 5)
The samples we send are to demonstrate colour and finish only. and may not be the thickness noted above. If you require a specific sample, please contact us.
Altro Coat is also available in clear.
Safety Red, Safety Yellow and Black are intended for line marking and small areas of demarcation only. Dark colours, in particular Black, will highlight any defects such as roller lines and scratches.
For safety colours, light or vibrant coloured coatings, a white undercoat should be used and additional coats may be required.
Safety Red, Safety Yellow and White are not included in Altro resins standard colour range. Bespoke non-standard colours will be subject to additional lead time and possibly increased cost.
For light to medium duty areas where there is a low risk of slipping.
Typical applications include: